| About |
|---|
| Ixan® PVS 801 is a PVDC resin-based blend for the extrusion and coextrusion of barrier films mainly used in flexible food packaging applications (heat shrinkable or not). It is recommended for applications requiring oxygen and carbon dioxide barrier especially designed for living cheese systems. Ixan® PVS 801 is a copolymer of vinylidene chloride and methyl acrylate supplied as an off-white, free-flowing powder.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PVDC |
| Material Status | Commercial: Active |
| Features | Low odor,Moisture resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| Oxygen transfer rate | |||
| 23℃，85% RH，10 µm | 100 | cm³/m²/24 hr | ASTM D3985 |
| Water vapor transmittance | |||
| 38℃，90% RH，10 µm | 14 | g/m²/24 hr | ASTM F1249 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 152 | ℃ | ISO 11357-3 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.57 | g/cm³ | ISO 1183 |
| Apparent density | 0.76 | g/cm³ | ISO 60 |
| Particle size | |||
| Average Diameter | 220 | µm | Internal Method |
| Apparent viscosity of melt | |||
| 165℃，100 sec^-1 | 775 | Pa·s | Internal Method |
| Notes |
|---|
| 1. Please contact your Account Manager to request an EU food contact and/or FDA letter which provides the specifications for compliance with these regulations. |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Cast film extruded (EVA/PVDC/EVA) — film conditioned two days at 40°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |