Ixef® 1038 - SOLIAO

About
Ixef® 1038 is a 30% glass-fiber reinforced polyarylamide compound which exhibits high strength and rigidity, outstanding surface finish, and excellent creep resistance. Black: Ixef® 1038 BK000 Grey: Ixef® 1038 GY001 Custom colorable&&

Product Description
Supplier	Solvay
Generic	Paraformaldehyde
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Good surface appearance,Good Dimensional Stability,High liquidity,Solvent resistance,Low moisture absorption
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.42	g/cm³	ISO 1183
Shrinkage rate
MD	0.10 to 0.40	%	Internal Method
Water absorption rate
23℃，24hr	0.30	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	13000	MPa	ISO 527-2
tensile strength
fracture	230	MPa	ISO 527-2
Tensile strain
fracture	2.5	%	ISO 527-2
Bending modulus	11000	MPa	ISO 178
bending strength	320	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	10	kJ/m²	ISO 180-1A
Notched impact strength of cantilever beam	40	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	230	℃	ISO 75-2/A

Electrical performance	Nominal value	Test method
Dielectric constant
2.40 GHz	3.50	ASTM D2520
Dissipation factor
2.4 GHz	0.010	ASTM D2520

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	120	°C
Drying time	0.50 to 1.5	hr
Barrel rear temperature	250 to 260	°C
Barrel front temperature	260 to 290	°C
Processing (melt) temperature	280 to 300	°C
Mold temperature	120 to 140	°C
Injection speed	快速

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.