Ixef® GS-1022

About
Ixef® GS-1022 is a 50% glass-fiber reinforced grade of polyarylamide (PARA) available in several colors. Parts molded from these colored resins can withstand high-energy gamma radiation without significant change in appearance and physical properties. Ixef® GS-1022 resins demonstrate no evidence of cytotoxicity, sensitization, intracutaneous reactivity or acute systemic toxicity, based on biocompatibility testing as defined by ISO 10993-1. This resin offers superior strength and stiffness combined with outstanding surface gloss and exceptional flow and is well suited for medical applications, such as single use surgical instruments and structural device housings, and applications in food service equipment. Colors available: Brown: GS-1022 BN01 Blue: GS-1022 BU01 Green: GS-1022 GN01 Grey: GS-1022 GY01 Grey: GS-1022 GY02 Grey: GS-1022 GY51 White: GS-1022 WH01&&

About

Ixef® GS-1022 is a 50% glass-fiber reinforced grade of polyarylamide (PARA) available in several colors. Parts molded from these colored resins can withstand high-energy gamma radiation without significant change in appearance and physical properties. Ixef® GS-1022 resins demonstrate no evidence of cytotoxicity, sensitization, intracutaneous reactivity or acute systemic toxicity, based on biocompatibility testing as defined by ISO 10993-1. This resin offers superior strength and stiffness combined with outstanding surface gloss and exceptional flow and is well suited for medical applications, such as single use surgical instruments and structural device housings, and applications in food service equipment. Colors available: Brown: GS-1022 BN01 Blue: GS-1022 BU01 Green: GS-1022 GN01 Grey: GS-1022 GY01 Grey: GS-1022 GY02 Grey: GS-1022 GY51 White: GS-1022 WH01&&

Product Description
Supplier	Solvay
Generic	Paraformaldehyde
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Good surface appearance,Good Dimensional Stability,High liquidity,Good disinfection,Gamma radiation,E-beam disinfection,Biocompatible,Radioactive,Radiation disinfection,Solvent resistance,Low moisture absorption,Ethylene oxide disinfection
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.78	g/cm³	ISO 1183
Shrinkage rate	0.10 to 0.30	%	ISO 294-4
Water absorption rate
Balance, 65% RH	1.5	%	Internal Method
23℃，24hr	0.16	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	22000	MPa	ISO 527-2
tensile strength
fracture	265	MPa	ISO 527-2
Tensile strain
fracture	1.8	%	ISO 527-2
Bending modulus	22000	MPa	ISO 178
bending strength	380	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	50	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	230	℃	ISO 75-2/A
Linear coefficient of thermal expansion
MD	1.5E-5	1/℃	ISO 11359-2

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	120	°C
Drying time	0.50 to 1.5	hr
Barrel rear temperature	250 to 260	°C
Barrel front temperature	260 to 290	°C
Nozzle temperature	260 to 290	°C
Processing (melt) temperature	280	°C
Mold temperature	120 to 140	°C
Injection speed	Fast

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.