| About |
|---|
| High-quality PE80 pressure pipes for gas and water transportation. Features Black PE80 pipe resin. Applications High-quality PE80 Pipes&& |
| Product Description | |
|---|---|
| Supplier | Jam |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Inoxidizability,Lubricating |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 to 0.957 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 10 | g/10min | |
| 190℃，5.0kg | 0.43 | g/10min | |
| Flow Rate Ratio（21.6/5） | 24.0 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hydrostatic strength | |||
| 80℃ | 5000 | hr | ISO 1167 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23 ℃, molded | 22 | kJ/m² | ISO 179/1eA |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4.5 N/mm² |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |