Jampilen EP310D

About
Jampilen EP310D is a high molecular weight, heterophasic polypropylene copolymer designed for extrusion applications where smooth processability and high mechanical properties are of the utmost importance. The processability of Jampilen EP310D in extrusion is excellent. The final items show good stiffness and very high impact strength, even at -20°C. Jampilen EP310D is particularly suitable for the extrusion of films for adhesive tapes and films for lamination to paper and other resins. Extrusion blow molded containers for detergents, toiletries and foodstuffs and blow molded technical parts are among other important applications. Jampilen EP310D is suitable for food contact.&&

About

Jampilen EP310D is a high molecular weight, heterophasic polypropylene copolymer designed for extrusion applications where smooth processability and high mechanical properties are of the utmost importance. The processability of Jampilen EP310D in extrusion is excellent. The final items show good stiffness and very high impact strength, even at -20°C. Jampilen EP310D is particularly suitable for the extrusion of films for adhesive tapes and films for lamination to paper and other resins. Extrusion blow molded containers for detergents, toiletries and foodstuffs and blow molded technical parts are among other important applications. Jampilen EP310D is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Food contact compliance,High molecular weight,Copolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	0.80	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	70	J/m
0℃	200	J/m
23℃	650	J/m

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss
60.0 µm	12		ASTM D2457
Haze
60 µm	60	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	80		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	15	%	ASTM D638
Bending modulus	1150	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.