Jampilen EP332L

About
“Jampilen EP332L” is a heterophasic polypropylene copolymer With a highly effective heat stabilization package designed for injection molded battery cases and technical items. The product offers an excellent balance of mechanical properties and processability and features an excellent long-term heat stability. Articles molded With “Jampilen EP332L” offer a good balance of stiffness and toughness, good surface properties and a very high resistance to chemicals and crazing. “Jampilen EP332L” is largely used for automotive components. Battery cases, cooling Water compensation reservoirs, brake fluid reservoirs, Wash Water reservoirs, dashboard supports, luggage compartment trims and door trim panels are typical applications. In the electro-technical industries, “Jampilen EP332L” is used for appliances, cables and Wires (e.g. as slotted core element in fibre optic cables). “Jampilen EP332L” is suitable for food contact. Features: Medium flow Excellent balance of stiffness/impact strength Excellent long-term heat stability Good heat aging Low Warpage Heterophasic copolymer Typical Applications: Battery cases, cooling Water compensation reservoirs Brake fluid reservoirs, Wash Water reservoirs, dashboard supports, luggage compartment trims and door trim panels Appliances, cables and Wires&&

About

“Jampilen EP332L” is a heterophasic polypropylene copolymer With a highly effective heat stabilization package designed for injection molded battery cases and technical items. The product offers an excellent balance of mechanical properties and processability and features an excellent long-term heat stability. Articles molded With “Jampilen EP332L” offer a good balance of stiffness and toughness, good surface properties and a very high resistance to chemicals and crazing. “Jampilen EP332L” is largely used for automotive components. Battery cases, cooling Water compensation reservoirs, brake fluid reservoirs, Wash Water reservoirs, dashboard supports, luggage compartment trims and door trim panels are typical applications. In the electro-technical industries, “Jampilen EP332L” is used for appliances, cables and Wires (e.g. as slotted core element in fibre optic cables). “Jampilen EP332L” is suitable for food contact. Features: Medium flow Excellent balance of stiffness/impact strength Excellent long-term heat stability Good heat aging Low Warpage Heterophasic copolymer Typical Applications: Battery cases, cooling Water compensation reservoirs Brake fluid reservoirs, Wash Water reservoirs, dashboard supports, luggage compartment trims and door trim panels Appliances, cables and Wires&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Good heat aging resistance,Good surface appearance,High impact resistance,Food contact compliance,Moderate liquidity,Copolymer,Solvent resistance,Heat Stabilized,High ESCR
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	7.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	40	J/m	ASTM D256
23℃	100	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	88.0	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525 2
Accelerate oven aging
150℃	1800	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	93		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	9.0	%	ASTM D638
Bending modulus	1200	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.