Jampilen EP340S

About
Jampilen EP340S is a high fluidity, nucleated heterophasic copolymer, particularly suitable for injection molding items that require superior mechanical properties balance over a wide temperature range. The easy flow of Jampilen EP340S provides outstanding processability and reduced cycle times. Items molded with Jampilen EP340S feature excellent impact strength and good stiffness. The mechanical properties at low temperature and dimensional stability are excellent. Jampilen EP340S has been designed for large items with significant impact requirements such as boxes, crates, pails and large household articles. Other applications include thin-walled containers, toys, appliance components, battery cases and some smaller items such as caps, closures and flower pots. Jampilen EP340S is suitable for food contact.&&

About

Jampilen EP340S is a high fluidity, nucleated heterophasic copolymer, particularly suitable for injection molding items that require superior mechanical properties balance over a wide temperature range. The easy flow of Jampilen EP340S provides outstanding processability and reduced cycle times. Items molded with Jampilen EP340S feature excellent impact strength and good stiffness. The mechanical properties at low temperature and dimensional stability are excellent. Jampilen EP340S has been designed for large items with significant impact requirements such as boxes, crates, pails and large household articles. Other applications include thin-walled containers, toys, appliance components, battery cases and some smaller items such as caps, closures and flower pots. Jampilen EP340S is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Good Dimensional Stability,High liquidity,Antifreeze,Nucleation,Quick molding cycle,Food contact compliance,Copolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	42	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	45	J/m
23℃	75	J/m

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	100	℃	ASTM D648
Vicat Softening Temp	148	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss
60°	70		ASTM D2457

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	86		ASTM D785
tensile strength
yield	25.0	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	1250	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.