Jampilen EP400G

About
Jampilen EP400G is a heterophasic polypropylene copolymer designed for extrusion applications where smooth processability and a good balance of mechanical properties are required. Jampilen EP400G offers excellent processability and the final items show good stiffness and outstanding impact resistance, even at temperatures down to -20°C. The major applications of Jampilen EP400G are the production of corrugated board and the extrusion of sheet for thermoforming. Other applications include blow molded bottles and containers for detergents and foodstuffs as well as technical parts for the automotive and appliance industries. Jampilen EP400G is suitable for food contact.&&

About

Jampilen EP400G is a heterophasic polypropylene copolymer designed for extrusion applications where smooth processability and a good balance of mechanical properties are required. Jampilen EP400G offers excellent processability and the final items show good stiffness and outstanding impact resistance, even at temperatures down to -20°C. The major applications of Jampilen EP400G are the production of corrugated board and the extrusion of sheet for thermoforming. Other applications include blow molded bottles and containers for detergents and foodstuffs as well as technical parts for the automotive and appliance industries. Jampilen EP400G is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Food contact compliance,Copolymer,low-temperature impact resistance
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	1.3	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	60	J/m
0℃	130	J/m
23℃	650	J/m

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	82		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	13	%	ASTM D638
Bending modulus	1150	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.