Jampilen EP648V

About
Jampilen EP648V is a nucleated, antistatic formulated, ultra high fluidity heterophasic copolymer designed for thin-walled injection molding applications. The product offers good stiffness/impact balance, good dimensional stability and outstanding antistatic properties. Jampilen EP648V offers the typical advantages of PP such as low odour transfer, no monomer migration, excellent stress cracking resistance and high chemical resistance, as well. The ultra high MFR and the specific formulation of Jampilen EP648V result in very easy mold filling, short cycle times, low shrinkage and low warpage. The finished items show excellent dimensional stability, good surface finish and high antistatic properties. Jampilen EP648V is mainly used for packaging, housewares and garden furniture. The most typical applications are items with long flow paths such as laundry bins, drawer trays, toy boxes, small containers, CD and DVD boxes, margarine tubs and packaging for dairy products. Jampilen EP648V is suitable for food contact.&&

About

Jampilen EP648V is a nucleated, antistatic formulated, ultra high fluidity heterophasic copolymer designed for thin-walled injection molding applications. The product offers good stiffness/impact balance, good dimensional stability and outstanding antistatic properties. Jampilen EP648V offers the typical advantages of PP such as low odour transfer, no monomer migration, excellent stress cracking resistance and high chemical resistance, as well. The ultra high MFR and the specific formulation of Jampilen EP648V result in very easy mold filling, short cycle times, low shrinkage and low warpage. The finished items show excellent dimensional stability, good surface finish and high antistatic properties. Jampilen EP648V is mainly used for packaging, housewares and garden furniture. The most typical applications are items with long flow paths such as laundry bins, drawer trays, toy boxes, small containers, CD and DVD boxes, margarine tubs and packaging for dairy products. Jampilen EP648V is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Good surface appearance,High impact resistance,Good Dimensional Stability,High liquidity,Low contractility,Nucleation,Quick molding cycle,Low odor,Food contact compliance,Copolymer,Solvent resistance,Antistatic property,High ESCR
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	100	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	35	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	115	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss
60°	75		ASTM D2457

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
tensile strength
yield	31.0	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	1550	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.