Jampilen HP502N

About
Jampilen HP502N is a medium fluidity polypropylene homopolymer and is particularly suitable for the production of heavy denier staple fibre and continuous filament. Jampilen HP502N exhibits good process stability and constant, high flow during extrusion. Jampilen HP502N is developed for the extrusion of staple fibres for spinning wool system fibres for carpets, rugs and garments such as overalls and socks. Jampilen HP502N is also suited for the production of continuous filament for ropes, belts and straps. Another typical application of Jampilen HP502N is the extrusion of decorative ribbons.&&

About

Jampilen HP502N is a medium fluidity polypropylene homopolymer and is particularly suitable for the production of heavy denier staple fibre and continuous filament. Jampilen HP502N exhibits good process stability and constant, high flow during extrusion. Jampilen HP502N is developed for the extrusion of staple fibres for spinning wool system fibres for carpets, rugs and garments such as overalls and socks. Jampilen HP502N is also suited for the production of continuous filament for ropes, belts and straps. Another typical application of Jampilen HP502N is the extrusion of decorative ribbons.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,High liquidity,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	3.0	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	95.0	℃	ASTM D648
Vicat Softening Temp	154	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss
60°	95		ASTM D2457

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	102		ASTM D785
tensile strength
yield	34.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1550	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.