Jampilen HP520H

About
Jampilen HP520H is a homopolymer designed for the production of biaxially oriented polypropylene films through a very stable extrusion on stenter and double bubble lines with excellent thickness control, increased drawability and readiness to a two way orientation. Jampilen HP520H contains a reinforced processing stabilization but does not contain any slip or antiblocking agents. BOPP films produced with this grade feature good mechanical properties, even at low temperatures, excellent barrier against moisture, odours, oils, fats and oxygen and high transparency, high gloss and good printability after corona treatment. Monolayer films made of Jampilen HP520H are used for food packaging, textiles packaging, flower wrappings and adhesive tapes. Jampilen HP520H is suitable for food contact.&&

About

Jampilen HP520H is a homopolymer designed for the production of biaxially oriented polypropylene films through a very stable extrusion on stenter and double bubble lines with excellent thickness control, increased drawability and readiness to a two way orientation. Jampilen HP520H contains a reinforced processing stabilization but does not contain any slip or antiblocking agents. BOPP films produced with this grade feature good mechanical properties, even at low temperatures, excellent barrier against moisture, odours, oils, fats and oxygen and high transparency, high gloss and good printability after corona treatment. Monolayer films made of Jampilen HP520H are used for food packaging, textiles packaging, flower wrappings and adhesive tapes. Jampilen HP520H is suitable for food contact.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,High impact resistance,Good dissection,Good Printability,Retention of aroma ,Low odor,Food contact compliance,Moisture resistance,Grease resistance,Block resin,Puncture Resistant,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	60	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ASTM D648
Vicat Softening Temp	154	℃	ASTM D1525 1
Accelerate oven aging
150℃	500	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
Haze
20 µm	0.30	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
tensile strength
yield	35.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1650	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.