Jampilen HP532J

About
Jampilen HP532J is a heat and detergent resistant polypropylene homopolymer. The product is designed for injection molding items which are subject to severe environmental conditions as well as extruded tapes and raffia. Jampilen HP532J offers good processability and finished items produced by it show good balance of stiffness and impact strength. Jampilen HP532J is formulated with a very effective heat and detergent stabilisation package for both dry and wet environments. The product also shows a high resistance to solvents and chemicals. In a dry environment, items produced with ?Jampilen HP532J can withstand a continuous heat of 95°C for over 80.000 hours and 70°C for over 1.000.000 hours. In a wet environment, the items can resist to a continuous temperature of 95°C for over 10.000 hours and 70°C for over 130.000 hours. In a wet environment in the presence of detergents, the items can withstand 95°C for over 4.500 hours and 70°C for more than 50.000 hours.&&

About

Jampilen HP532J is a heat and detergent resistant polypropylene homopolymer. The product is designed for injection molding items which are subject to severe environmental conditions as well as extruded tapes and raffia. Jampilen HP532J offers good processability and finished items produced by it show good balance of stiffness and impact strength. Jampilen HP532J is formulated with a very effective heat and detergent stabilisation package for both dry and wet environments. The product also shows a high resistance to solvents and chemicals. In a dry environment, items produced with ?Jampilen HP532J can withstand a continuous heat of 95°C for over 80.000 hours and 70°C for over 1.000.000 hours. In a wet environment, the items can resist to a continuous temperature of 95°C for over 10.000 hours and 70°C for over 130.000 hours. In a wet environment in the presence of detergents, the items can withstand 95°C for over 4.500 hours and 70°C for more than 50.000 hours.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,High Heat Resistance,Solvent resistance,Homopolymer,Resistance to detergents
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	3.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	55	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ASTM D648
Vicat Softening Temp	156	℃	ASTM D1525 1
Accelerate oven aging
150℃	1800	hr	ASTM D3012

Supplementary information	Nominal value	Unit
Heat resistance
Dry Environment：70℃	> 114	yr
Dry Environment：95℃	> 9	yr
Wet Environment：70℃	> 15	yr
Wet Environment：95℃	> 1	yr
Wet Environment with Detergent：70℃	> 6	yr
Wet Environment with Detergent：95℃	> 1	yr

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	102		ASTM D785
tensile strength
yield	35.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1550	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.