Jampilen HP554N

About
Jampilen HP554N is a polypropylene homopolymer designed for the production of fine denier staple fibers for nonwoven, thermobonded fabrics and offers outstanding spinnability, superior thermobonding and excellent antigasfading properties. Fabrics made with Jampilen HP554N are characterized by softness, textile-like appearance and high tear resistance. In comparison with standard polypropylene types for thermobonding applications, Jampilen HP554? offers some distinct advantages: The processability with the long-spinning technology is outstanding, resulting in high and uniform fiber quality and less down-time, A broad thermal bonding window is achieved, which facilitates start-up and adjustments of the plant, and It shows a 20 to 30 % increase in thermal bonding ability.This makes it possible to produce fabrics with a higher tear strength or with a lower weight per square meter for the same strength.&&

About

Jampilen HP554N is a polypropylene homopolymer designed for the production of fine denier staple fibers for nonwoven, thermobonded fabrics and offers outstanding spinnability, superior thermobonding and excellent antigasfading properties. Fabrics made with Jampilen HP554N are characterized by softness, textile-like appearance and high tear resistance. In comparison with standard polypropylene types for thermobonding applications, Jampilen HP554? offers some distinct advantages: The processability with the long-spinning technology is outstanding, resulting in high and uniform fiber quality and less down-time, A broad thermal bonding window is achieved, which facilitates start-up and adjustments of the plant, and It shows a 20 to 30 % increase in thermal bonding ability.This makes it possible to produce fabrics with a higher tear strength or with a lower weight per square meter for the same strength.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good tear strength,Solvent resistance,Soft,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	30	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	95.0	℃	ASTM D648
Vicat Softening Temp	154	℃	ASTM D1525 1
Accelerate oven aging
150℃	150	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	102		ASTM D785
tensile strength
yield	34.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1550	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.