Jampilen HP562R

About
Jampilen HP562R is a high melt flow homopolymer with narrow molecular weight distribution for the high speed production of low denier continuous filament for spun bonded, nonwoven fabrics. The major applications for spun bonded fabrics made of Jampilen HP562R are diapers, medical and sanitary tissues, protective fabrics for agricultural, industrial and medical applications, backings and linings for the furniture, bedding and carpet industries. Jampilen HP562R can also be used for the production of partially oriented yarn and bulked continuous filament. Jampilen HP562R is suitable for food contact.&&

About

Jampilen HP562R is a high melt flow homopolymer with narrow molecular weight distribution for the high speed production of low denier continuous filament for spun bonded, nonwoven fabrics. The major applications for spun bonded fabrics made of Jampilen HP562R are diapers, medical and sanitary tissues, protective fabrics for agricultural, industrial and medical applications, backings and linings for the furniture, bedding and carpet industries. Jampilen HP562R can also be used for the production of partially oriented yarn and bulked continuous filament. Jampilen HP562R is suitable for food contact.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High liquidity,Food contact compliance,Weight distribution,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	30	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	92.0	℃	ASTM D648
Vicat Softening Temp	151	℃	ASTM D1525 1
Accelerate oven aging
150℃	150	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	92		ASTM D785
tensile strength
yield	30.0	MPa	ASTM D638
Tensile strain
yield	14	%	ASTM D638
Bending modulus	1200	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.