Jampilen RP128M

About
Jampilen RP128M is a low sealing temperature polypropylene. The product is designed for coextruded bioriented polypropylene film and is formulated with a slip and antiblocking package. Jampilen RP128M exhibits very high transparency, excellent gloss and outstanding heat weldability. Films made with this grade show good hot tack and low seal initiation temperature (110 to 115°C). Due to its good flow properties, Jampilen RP128M can be coextruded with polypropylene grades with a relatively high melt flow rate. Coextruded BOPP films combine high resistance to moisture, fats, and oils, with good mechanical and optical properties. Jampilen RP128M is suitable for food contact.&&

About

Jampilen RP128M is a low sealing temperature polypropylene. The product is designed for coextruded bioriented polypropylene film and is formulated with a slip and antiblocking package. Jampilen RP128M exhibits very high transparency, excellent gloss and outstanding heat weldability. Films made with this grade show good hot tack and low seal initiation temperature (110 to 115°C). Due to its good flow properties, Jampilen RP128M can be coextruded with polypropylene grades with a relatively high melt flow rate. Coextruded BOPP films combine high resistance to moisture, fats, and oils, with good mechanical and optical properties. Jampilen RP128M is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Smoothness,Good liquidity,Optical performance,High anti-blocking,Food contact compliance,Thermal viscous strength,Moisture resistance,Grease resistance,Welding,Terpolymer,Low temperature heat sealing
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	8.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	80	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	65.0	℃	ASTM D648
Vicat Softening Temp	116	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss	85		ASTM D2457
Haze	1.8	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	86		ASTM D785
tensile strength
yield	22.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	750	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.