Jampilen RP129K

About
Jampilen RP129K is a low sealing temperature polypropylene resin. The product is designed for coextruded bioriented polypropylene film and is formulated with an antiblocking package. Jampilen RP129K exhibits very high transparency, excellent gloss and outstanding heat weldability. The seal initiation temperature is low (110 to 115°C) and the films show good hot tack. Jampilen RP129K is particularly suited for metallized BOPP films used to produce packaging which combines protection against light, moisture, flavor loss, oxygen and temperature variations with good optical properties.&&

About

Jampilen RP129K is a low sealing temperature polypropylene resin. The product is designed for coextruded bioriented polypropylene film and is formulated with an antiblocking package. Jampilen RP129K exhibits very high transparency, excellent gloss and outstanding heat weldability. The seal initiation temperature is low (110 to 115°C) and the films show good hot tack. Jampilen RP129K is particularly suited for metallized BOPP films used to produce packaging which combines protection against light, moisture, flavor loss, oxygen and temperature variations with good optical properties.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Optical performance,High anti-blocking,Retention of aroma ,Low odor,Moisture resistance,Electroplating,Welding,Terpolymer,Low temperature heat sealing,Shading
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	5.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	90	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	65.0	℃	ASTM D648
Vicat Softening Temp	118	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss	85		ASTM D2457
Haze	1.8	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	84		ASTM D785
tensile strength
yield	22.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	700	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.