Jampilen RP215M

About
Jampilen RP215M is a medium modified polypropylene random copolymer for the extrusion of cast and waterquenched blown films and is formulated with a slip and antiblock package. Jampilen RP215M offers good processability, excellent clarity and gloss and exhibits very good heat weldability. The seal initiation temperature is about 130°C. This grade is designed for quality packaging applications, either as monolayer film or as welding layer in coextruded structures. Due to its excellent weldability, Jampilen RP215M is well suited for lamination to PP-film or other materials such as PA, polyester or aluminium to form the sealing layer.&&

About

Jampilen RP215M is a medium modified polypropylene random copolymer for the extrusion of cast and waterquenched blown films and is formulated with a slip and antiblock package. Jampilen RP215M offers good processability, excellent clarity and gloss and exhibits very good heat weldability. The seal initiation temperature is about 130°C. This grade is designed for quality packaging applications, either as monolayer film or as welding layer in coextruded structures. Due to its excellent weldability, Jampilen RP215M is well suited for lamination to PP-film or other materials such as PA, polyester or aluminium to form the sealing layer.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good surface appearance,Smoothness,High anti-blocking,Random copolymer,Welding,Low temperature heat sealing
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	6.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	55	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	78.0	℃	ASTM D648
Vicat Softening Temp	132	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss	88		ASTM D2457
Haze	1.8	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	92		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	950	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.