Jampilen RP340R

About
“Jampilen RP340R” is a nucleated polypropylene random copolymer with high fluidity and outstanding transparency and gloss and is designed for injection molding applications. “Jampilen RP340R” is the material of choice for applications where transparency is a primary requirement. This grade is also suitable for injection stretch blow molded containers and bottles. This product combines good see through clarity and excellent moisture barrier properties with hot fillability. Therefore, “Jampilen RP340R” offers an effective alternative for PET and PVC for the packaging of non-oxygen sensitive products such as confectionary, herbs, toiletries and cosmetics. Features: High melt flow Excellent transparency Excellent gloss Random copolymer Typical Applications: Household containers, housewares Packaging for food, cosmetics and pharmaceutical products Clear tubs and pots for ice cream, yoghurt and other desserts Medical sector such as syringes, test tubes and vials Lids, caps and closures CD and DVD boxes Injection stretch blow molded containers and bottles Sports, leisure and toys&&

About

“Jampilen RP340R” is a nucleated polypropylene random copolymer with high fluidity and outstanding transparency and gloss and is designed for injection molding applications. “Jampilen RP340R” is the material of choice for applications where transparency is a primary requirement. This grade is also suitable for injection stretch blow molded containers and bottles. This product combines good see through clarity and excellent moisture barrier properties with hot fillability. Therefore, “Jampilen RP340R” offers an effective alternative for PET and PVC for the packaging of non-oxygen sensitive products such as confectionary, herbs, toiletries and cosmetics. Features: High melt flow Excellent transparency Excellent gloss Random copolymer Typical Applications: Household containers, housewares Packaging for food, cosmetics and pharmaceutical products Clear tubs and pots for ice cream, yoghurt and other desserts Medical sector such as syringes, test tubes and vials Lids, caps and closures CD and DVD boxes Injection stretch blow molded containers and bottles Sports, leisure and toys&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Nucleation,Food contact compliance,Moisture resistance,Random copolymer,Moderate liquidity
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	65	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	83.0	℃	ASTM D648
Vicat Softening Temp	127	℃	ASTM D1525 2
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss	73		ASTM D2457
Haze
1000 µm	22	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	94		ASTM D785
tensile strength
yield	28.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1050	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.