| About |
|---|
| Fluoroelastomer (F26) (FKM) Quality Standard: Q/321200GDH010—2010&& |
| Product Description | |
|---|---|
| Supplier | Meilan |
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.80 to 1.84 | g/cm³ | |
| Mooney viscosity | |||
| ML 1+10，121℃ | 51 to 90 | MU | |
| water content | < 0.050 | % | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 9.00 | MPa | |
| Tensile strain | |||
| fracture | > 160 | % | |
| Compression deformation | |||
| 200℃，70 hr | < 30 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Oil resistance | |||
| 1# jet fuel oil，200℃/24h | < 6.0 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Bisphenol-AF vulcanization system |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |