Jieda PA610 Resin

About
PA610 (Polyamide 610 or nylon 610) is an ivory-white to light yellow translucent solid made by the condensation polymerization of the neutralized salt of sebacic acid and hexanediamine. It has toughness, dimensional stability, wear resistance, oil and alkali resistance, low water absorption, and self-lubricating property. Processing methods of PA610 include extrusion, injection molding, and blow molding. End use applications include gears, bearings, cushions, sealants, insulators, electronic boards, thin films, filaments, etc.&&

About

PA610 (Polyamide 610 or nylon 610) is an ivory-white to light yellow translucent solid made by the condensation polymerization of the neutralized salt of sebacic acid and hexanediamine. It has toughness, dimensional stability, wear resistance, oil and alkali resistance, low water absorption, and self-lubricating property. Processing methods of PA610 include extrusion, injection molding, and blow molding. End use applications include gears, bearings, cushions, sealants, insulators, electronic boards, thin films, filaments, etc.&&

Product Description
Supplier	Jieda
Generic	PA610
Material Status	Commercial: Active
Features	Good flexibility,Alkali resistant,Good Dimensional Stability,Low or no water absorption,Self-lubricating,Good wear resistance,Grease resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.09	g/cm³
Water absorption rate
saturated	0.50	%

MECHANICAL	Nominal value	Unit
Tensile modulus	220	MPa
tensile strength	60.0	MPa
Tensile strain
fracture	200	%

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	56	J/m

THERMAL	Nominal value	Unit
Hot deformation temperature
1.8 MPa, unannealed	57.0	℃
Linear coefficient of thermal expansion
MD	9.9E-5	1/℃

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	4.0E+14	ohms·cm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.