K-Bin Rigid PVC KB-5011

About
Interior rigid PVC general purpose compound. Easy to process and gives extended runs without loss of color or degradation.&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Excellent Processability
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.43	g/cm³	ASTM D792

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	670	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	72.0	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0 5V		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	81		ASTM D2240
Tensile modulus	2980	MPa	ASTM D638
tensile strength
yield	45.5	MPa	ASTM D638
Bending modulus	2720	MPa	ASTM D790
bending strength	68.9	MPa	ASTM D790

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	163	°C
Barrel 2 zone temperature	166	°C
Barrel 3 zone temperature	171	°C
Barrel 4 zone temperature	174	°C
Nozzle temperature	185	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.