| About |
|---|
| K PP 11000 is a Compounded Polypropylene material. It is available in Africa & Middle East. Important attributes of K PP 11000 are: Impact Resistant High Flow High Shrinkage UV Resistant Typical application of K PP 11000: Automotive&& |
| Product Description | |
|---|---|
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High impact resistance,High liquidity,low-temperature impact resistance,High shrinkage |
| Availabilitys | Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 to 0.940 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | > 14 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | < 1.0 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -20℃ | 98 | J/m | ASTM D256 |
| 23℃ | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 140 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 52 | ||
| tensile strength | |||
| yield | 18.6 | MPa | ASTM D638 |
| Bending modulus | 1370 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |