K-Prene 7000 XL 70

About
K-Prene 7000 XL 70 is a Thermoplastic Vulcanizate (TPV) material. It is available in Africa & Middle East. Primary attribute of K-Prene 7000 XL 70: Chemical Resistant. Typical application of K-Prene 7000 XL 70: Handles&&

Product Description
Generic	TPV
Material Status	Commercial: Active
Features	Alkali resistant,Solvent resistance,Soft
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D1505
Melt Flow Rate
230℃，5.0kg	1.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	65 to 75		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	4.50	MPa	ASTM D412
Tensile strain
fracture	400	%	ASTM D412

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.