| About |
|---|
| K-Prene INSULATION EPR 5082 is a Melt Processable Rubber (MPR) material. It is available in Africa & Middle East. Important attributes of K-Prene INSULATION EPR 5082 are: Flame Rated Flame Retardant Chemical Resistant Good Flexibility UV Resistant Typical applications include: Wire & Cable Automotive Handles Hose/Tubing&& |
| Product Description | |
|---|---|
| Generic | MPR |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good Electrical Properties,Flame Characteristics,Low temperature toughness,Good wear resistance,Solvent resistance,V-0 |
| Availabilitys | Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 82 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 11.8 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 650 | % | ASTM D412 |
| tear strength | 83.4 | kN/m | ASTM D624 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | 0.60 to 0.95 | kV/mm | ASTM D149 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ozone resistance | Excellent | ||
| Using – Temperature | 125 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |