| About |
|---|
| K-PU 7765 is a Thermoplastic Polyurethane Elastomer material. It is available in Africa & Middle East for extrusion. Important attributes of K-PU 7765 are: Chemical Resistant Crosslinkable Good Flexibility Impact Modified Wear Resistant Typical application of K-PU 7765: Wire & Cable&& |
| Product Description | |
|---|---|
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Crosslinked,High elastic,Good melt strength,Good wear resistance,Grease resistance,Soft |
| Availabilitys | Africa & Middle East |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 65 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 8.62 | MPa | ASTM D412 |
| 100% strain | 2.48 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 640 | % | ASTM D412 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |