| About |
|---|
| K-Resin® KK38 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin® SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin® SBC tailored for your sheet extrusion needs. FEATURES Combines Clarity and Toughness Good Formability High Surface Gloss Good Toughness and Stiffness APPLICATIONS Thermoformed Blister Packs Portion Packages Cups and Lids&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | SBC |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Clarity,Good flexibility,Good surface appearance,Food contact compliance,Copolymer,low-temperature impact resistance,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.00 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 9.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 56 | ASTM D2240 | |
| tensile strength | |||
| yield | 16.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 260 | % | ASTM D638 |
| Bending modulus | |||
| 3.18 mm | 1370 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 3.18 mm | 24.8 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Dart impact equipped with measuring instruments | |||
| 23℃，3.18 mm，Total Energy | 38.4 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 56.7 | ℃ | ASTM D648 |
| Vicat Softening Temp | 74.4 | ℃ | ASTM D1525 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | 92.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |