| About |
|---|
| K-Resin® KR01 process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. FEATURES Excellent Clarity Good Stiffness Good Toughness High Surface Gloss Warpage Resistance APPLICATIONS Molded Boxes with Integral Hinges Medical Devices Displays Toys&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good Clarity,Block Copolymer,High elastic,Good Rigidity,Good surface appearance,Excellent Processability |
| Availabilitys | Latin America,North America,Europe,Africa & Middle East ,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 200℃，5kg | 8 | g/10min | ISO 1133 |
| Density | 1010 | kg/m³ | ISO 1183 |
| Moisture Absorption | |||
| Equilibrium, 23 ℃, 50% r. h | 0.07 | % | ISO 62 |
| Mold Shrinkage | |||
| Linear | 0.3-1 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield yld | 33 | MPa | ISO 527-2 |
| Broken BRK | 24 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK | 15 | % | ISO 527 |
| Tensile Modulus | 1600 | MPa | ISO 527 |
| Flexural Strength | 45 | MPa | ISO 178 |
| Flexural Modulus | 1500 | MPa | ISO 178 |
| Shore hardness | 70 | Shore D | ISO 868 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | 3 | KJ/m² | ISO 180/1A |
| Charpy Notched Impact Strength | 1.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | 30 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| 50N, 50 °C/h | 65 | ℃ | ISO 306/B |
| 10N, 120 °C/h | 95 | ℃ | ISO 306/B |
| Hot deformation temperature HDT | |||
| 1.8 MPa | 65 | ℃ | ISO 75-1/-2 |
| 0.45 MPa | 75 | ℃ | ISO 75-1/-2 |
| OPTICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Light Transmission | 92 | % | ASTM D1003 |
| Haze | <1 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Melt Temperature | 180-240 | ℃ | ISO 294 |
| Mold Temperature | 30-50 | ℃ | ISO 294 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |