| About |
|---|
| K-Resin® KR03 process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. FEATURES Excellent Clarity Good Stiffness Good Formability Good Toughness High Surface Gloss KR03NW is the no-wax (NW) form of KR03 to facilitate printing APPLICATIONS Bottles Molded Boxes and Containers Medical Devices Portion Packages Blister Packaging&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | SBC |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good Clarity,Good flexibility,Good surface appearance,Good Printability,Block Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 7.5 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| balance | 0.090 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Dart impact equipped with measuring instruments | |||
| Total Energy | 40.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 62.2 | ℃ | ASTM D648 |
| Vicat Softening Temp | 85.0 | ℃ | ASTM D1525 2 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | 162 | ASTM D2457 | |
| Transmittance | |||
| 550 nm | 92.0 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 63 | ASTM D2240 | |
| tensile strength | |||
| Yield, 23 ℃ | 26.2 | MPa | ASTM D638 |
| Yield, 23 ℃ | 26.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 230 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 1800 | MPa | ASTM D790 |
| bending strength | |||
| 23℃ | 37.2 | MPa | ASTM D790 |
| 23℃ | 37.0 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |