| About |
|---|
| K-Resin® KR53 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. FEATURES Excellent Clarity High Surface Gloss Good Toughness Good Heat Sealability APPLICATIONS Medical Packaging Produce Packaging Twist Wrap Lidstock and Labeling Film&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | SBC |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good flexibility,Good surface appearance,Good heat sealing |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 10 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| Secant modulus | |||
| 1% secant, TD, 25 µ m, blow molded film | 590 | MPa | ASTM D882 |
| 1% secant, MD, 25 µ m, blow molded film | 750 | MPa | ASTM D882 |
| tensile strength | |||
| TD, yield, 25 µ m, blow molded film | 20.0 | MPa | ASTM D882 |
| MD, yield, 25 µ m, blow molded film | 25.0 | MPa | ASTM D882 |
| Tensile strain | |||
| TD, fracture, 25 µ m, blow molded film | 180 | % | ASTM D882 |
| MD, fracture, 25 µ m, blow molded film | 180 | % | ASTM D882 |
| Drop hammer impact | |||
| 25 µ m, blow molded film | 580 | g | ASTM D1709 |
| tear strength | |||
| TD, 25 µ m, blow molded film | 25 | g | ASTM D1922 |
| MD, 25 µ m, blow molded film | 20 | g | ASTM D1922 |
| Oxygen transfer rate | |||
| 25 µ m, blow molded film | 110 | cm³·mm/m²/atm/24 hr | ASTM D3985 |
| Water vapor transmittance | |||
| 25 µ m, blow molded film | 1.5 | g·mm/m²/atm/24 hr | ASTM F1249 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Dart impact equipped with measuring instruments | |||
| 0.0254 mm, blow molded film | 1.10 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 62.8 | ℃ | ASTM D1525 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 25.4 µ m, blow molded film | 140 | ASTM D523 | |
| Haze | |||
| 25.4 µ m, blow molded film | 0.20 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |