K-Resin® SBC XK44

About
K-Resin® XK44 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin® SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin® SBC tailored for your sheet extrusion needs. K-Resin® XK44 will process on most conventional equipment, allowing the molder to run a crystal clear bottle without expensive machine modifications, special molds, different screws, or dryers. K-Resin® SBC are blow molded in a broad range of sizes and shapes, from small pill bottles and medical drainage units, to very tall display bottles. They can also be injection blow molded into extremely high impact bottles with glass-like clarity. FEATURES Good Clarity Good Stiffness Good Formability Good Toughness High Surface Gloss APPLICATIONS Thermoformed Clam Shell Packaging Thermoformed Blister Packs Thermoformed Medical Trays Blow Molded Products&&

About

K-Resin® XK44 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin® SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin® SBC tailored for your sheet extrusion needs. K-Resin® XK44 will process on most conventional equipment, allowing the molder to run a crystal clear bottle without expensive machine modifications, special molds, different screws, or dryers. K-Resin® SBC are blow molded in a broad range of sizes and shapes, from small pill bottles and medical drainage units, to very tall display bottles. They can also be injection blow molded into extremely high impact bottles with glass-like clarity. FEATURES Good Clarity Good Stiffness Good Formability Good Toughness High Surface Gloss APPLICATIONS Thermoformed Clam Shell Packaging Thermoformed Blister Packs Thermoformed Medical Trays Blow Molded Products&&

Product Description
Supplier	INEOS
Generic	SBC
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Good flexibility,Good surface appearance,Food contact compliance,Copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.01	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	6.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ASTM D2240
tensile strength
yield	21.6	MPa	ASTM D638
Tensile strain
fracture	350	%	ASTM D638
Bending modulus
3.18 mm	1120	MPa	ASTM D790
bending strength
Yield, 3.18 mm	34.5	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Dart impact equipped with measuring instruments
23℃，3.18 mm，Total Energy	47.5	J	ASTM D3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	52.8	℃	ASTM D648
Vicat Softening Temp	75.6	℃	ASTM D1525

optical performance	Nominal value	Unit	Test method
Transmittance	93.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
2. Rate B (120°C/h), Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.