K-vinyl 105 Deg C Rating Insulation (Auto)

About
K-vinyl 105 Deg C Rating Insulation (Auto) is a Polyvinyl Chloride material. It is available in Africa & Middle East for extrusion. Important attributes of K-vinyl 105 Deg C Rating Insulation (Auto) are: RoHS Compliant Fast Molding Cycle Heat Resistant Typical application of K-vinyl 105 Deg C Rating Insulation (Auto): Wire & Cable&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Quick molding cycle,High Heat Resistance,Lead content is low to none
Availabilitys	Africa & Middle East
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³	ASTM D792

Aging performance	Nominal value	Unit	Test method
The rate of change in tensile strength in air
The rate of change in ultimate elongation in air
120℃，120 hr	12	%	ASTM D573

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-27.0	℃	ASTM D746
thermal stability
200℃	2	hr

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.4E+14	ohms·cm	ASTM D257

Supplementary information	Nominal value	Unit	Test method
Volatile loss
3 hrs，130℃	< 0.50	%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	89		ASTM D2240
tensile strength
yield	16.8	MPa	ASTM D638
Tensile strain
fracture	300	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.