| About |
|---|
| K-vinyl KK-S-A-86 is a Polyvinyl Chloride material. It is available in Africa & Middle East. Typical application of K-vinyl KK-S-A-86: Wire & Cable&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.47 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | < 4.0 | % | ASTM D955 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Cold shock | No cracks | ||
| thermal shock | No cracks | ||
| thermal stability | |||
| 200℃ | 1 | hr |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Aging test | ASTM S573 | ||
| in Hot Oven（E.B.） | 20.0 | ASTM S573 | |
| in Hot Oven（T.S.） | 20.0 | ASTM S573 | |
| Loss of Mass | 17.0 | g/m² | ASTM D573 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 86 | ASTM D2240 | |
| tensile strength | |||
| yield | 15.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 220 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |