| About |
|---|
| LEAD FREE AND FLAME RETARDANT PVC COMPOUND CLASS 70C (ST1) RECOMMENDED FOR JACKETING OF ELECTRICAL FLEXIBLE CABLES AND COAXIAL CABLES. ALSO SUITABLE FOR PLUG INJECTION.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Negative |
| Features | Lead content is low to none |
| Availabilitys | Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.42 to 1.48 | g/cm³ | IEC 60811-1-3 |
| Color a | -0.790 to 0.810 | ME 12 | |
| Color b | -1.39 to 0.210 | ME 12 | |
| Color L | 26.6 to 28.2 | ME 12 | |
| colour | OK | ME 12 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 12.6 | MPa | IEC 60811-1-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -5.00 | ℃ | ASTM D746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+13 | ohms·cm | NBR 5403 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | > 30 | % | NBR 6245 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Maximum Variation of Elongation | < 25 | % | IEC 60811-1-2 |
| Maximum Variation of Tensile Strength | < 25 | % | IEC 60811-1-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 78 to 82 | NBR 7456 | |
| tensile strength | > 12.6 | MPa | IEC 60811-1-1 |
| Tensile strain | |||
| fracture | > 200 | % | IEC 60811-1-2 |
| yield | > 200 | % | IEC 60811-1-1 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |