| About |
|---|
| HEAVY METAL FREE PVC COMPOUND RECOMMENDED FOR PROFILES EXTRUSION. ALSO RECOMMENDED FOR PLUG INJECTION.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Negative |
| Availabilitys | Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 to 1.46 | g/cm³ | IEC 60811-1-3 |
| Color a | -1.54 to 1.46 | ME 12 | |
| Color b | 7.52 to 10.5 | ME 12 | |
| Color L | 74.7 to 77.7 | ME 12 | |
| colour | OK | ME 12 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 68 to 72 | NBR 7456 | |
| tensile strength | > 6.37 | MPa | IEC 60811-1-1 |
| Tensile strain | |||
| yield | > 250 | % | IEC 60811-1-1 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |