| About |
|---|
| HDPE CABLE COMPOSITIONS GOST 16336-2013 Production method: gas-phase method. Application: HDPE composition of 271-274K Grade is intended for insulating cable sheathing, cable covering and cables.&& |
| Product Description | |
|---|---|
| Supplier | Joint |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 to 0.955 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，5.0kg | 0.30 to 0.65 | g/10min | |
| ESCR(Environmental Stress Cracking Resistance) | > 500 | hr | |
| Ash Content | < 0.050 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 22.6 | MPa | |
| Tensile strain | |||
| fracture | > 700 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Impurities | < 10.0 | pcs | |
| volatility | < 0.10 | % | |
| tear strength | 21.6 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |