| About |
|---|
| GOST / TU: TU 2243-121-00203335-2000 Resistant to copper ions with improved processability intended for cables’ insulation, sheath and serving. These grades are produced in natural color pellets.&& |
| Product Description | |
|---|---|
| Supplier | Joint |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Copper contact stability |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.943 to 0.949 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.40 to 0.60 | g/10min | |
| ESCR(Environmental Stress Cracking Resistance) | > 500 | hr | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 17.0 | MPa | |
| Tensile strain | |||
| fracture | > 700 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| thermal stability | |||
| 200℃ | > 20 | hr |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | |||
| 1 mm | > 40 | kV/mm | |
| Relative permittivity | |||
| 1 MHz | 2.40 | ||
| Dissipation factor | |||
| 1 MHz | < 2.0E-4 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Impurities | 3.00 to 15.0 | count/g | |
| tear strength | > 21.6 | MPa | |
| volatility | 0.10 to 0.15 | % |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |