| About |
|---|
| LDPE FILM EXTRUSION GOST16337-77, rev. 1-3 Production method: low density polyethylene is produced by high pressure ethylene polymerization in tubular reactors and reactors with agitator using radical initiators. Application: production of bags, pipes, fittings, articles designed for foodstuff contact, toys, films and film articles, shaped-molded parts, etc.&& |
| Product Description | |
|---|---|
| Supplier | Joint |
| Generic | LDPE |
| Material Status | Commercial: Negative |
| Features | Low density |
| Availabilitys | Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.917 to 0.920 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | |
| ESCR(Environmental Stress Cracking Resistance) | > 2.00 | hr | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 9.32 | MPa | |
| Tensile strain | |||
| fracture | > 550 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Impurities | < 2.00 | pcs | |
| tear strength | > 12.3 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |