| About |
|---|
| GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc.&& |
| Product Description | |
|---|---|
| Supplier | Joint |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.919 to 0.922 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.30 | g/10min | |
| ESCR(Environmental Stress Cracking Resistance) | > 500 | hr | |
| Extractables | % | ||
| Melt Flow | |||
| Dispersin within a batch | % | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 98.0 | MPa | |
| fracture | > 137 | MPa | |
| Tensile strain | |||
| fracture | > 600 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Number of Inclusions | > 2.00 | ||
| Odor level |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |