| About |
|---|
| Product Description | |
|---|---|
| Supplier | Joint |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 15.0±1.5 | g/10min | |
| Melt Flow Rate | All spot samples shall orrespond to item no. 1 | % | |
| Number of visible pollutants | 5 | pcs./100 g | |
| smoke | 0.8 | % | |
| Transmission factor | 89 | % | |
| Blue Yellow Index | – | b* | |
| Blue Yellow Index | 1.3-1.6 | b* | |
| Transparency Brightness Index | 90 | min | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 60 | Mpa | |
| Tensile strain | |||
| fracture | 115 | % | |
| bending strength | – | MPa | |
| Bending modulus | – | Mpa | |
| Compressive stress | – | Pa |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 147 | ℃ |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 66 | kJ/m² |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |