About |
---|
Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound. Application: Impact Modifier for PVC Magnetic, etc Performance: Faster fusion time and perform excellent at low temperature, and can be stored in silos.&& |
Product Description | |
---|---|
Supplier | Keli |
Generic | CPE |
Material Status | Commercial: Active |
Features | Weather resistance is good,High impact resistance,Antifreeze,Good wear resistance,Solvent resistance |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Chlorine content | 24.0 to 26.0 | wt% | ISO 7725 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s A | < 80 | ISO 7619 |
elastic body | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | |||
fracture | > 8.00 | MPa | ISO 37 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |