| About |
|---|
| Kemcor HD 2990 is a High Density Polyethylene material. It is available in North America for extrusion, pipe extrusion, or profile extrusion. Primary attribute of Kemcor HD 2990: Rigid. Typical application of Kemcor HD 2990: Plumbing/Piping/Potable Water&& |
| Product Description | |
|---|---|
| Supplier | Qenos |
| Generic | HDPE |
| Material Status | Commercial: Negative |
| Features | Good Rigidity |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.80 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 132 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 66 | ASTM D2240 | |
| Tensile modulus | 800 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 28.0 | MPa | ASTM D638 |
| fracture | 29.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |