| About |
|---|
| Kemcor HD 550 is a High Density (HMW) Polyethylene material. It is available in North America for extrusion or pipe extrusion. Important attributes of Kemcor HD 550 are: Good Flexibility Good Toughness High Molecular Weight Wear Resistant Weather Resistant Typical applications include: Automotive Plumbing/Piping/Potable Water&& |
| Product Description | |
|---|---|
| Supplier | Qenos |
| Generic | HMW-HDPE |
| Material Status | Commercial: Negative |
| Features | Weather resistance is good,Good flexibility,High molecular weight,Good wear resistance |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.10 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 130 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 63 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 24.0 | MPa | ASTM D638 |
| fracture | 30.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 800 | % | ASTM D638 |
| Bending modulus | 970 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |