KetaSpire® KT-1211FP

About
KetaSpire® KT-1211FP is a low melt flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural color fine powder form for compression molding and compounding uses in the health care industry. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. KetaSpire® PEEK also complies with the ISO 10993 standard for use in medical applications. KetaSpire® KT-1211FP is well-suited as a raw material or material of construction for a variety of healthcare applications.

About

KetaSpire® KT-1211FP is a low melt flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural color fine powder form for compression molding and compounding uses in the health care industry. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. KetaSpire® PEEK also complies with the ISO 10993 standard for use in medical applications. KetaSpire® KT-1211FP is well-suited as a raw material or material of construction for a variety of healthcare applications.

Product Description
Supplier	Solvay
Generic	PEEK
Material Status	Commercial: Active
Features	High impact resistance,Good Dimensional Stability,Ductility,Flame Characteristics,High Heat Resistance,Fatigue resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³	ASTM D792
Water absorption rate
24hr	0.10	%	ASTM D570
Particle size
Retained on 100 mesh sieve	< 0.00	%
Retained on 140 mesh sieve	< 2.00	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3650	MPa	ASTM D638
tensile strength	96.5	MPa	ASTM D638
Tensile strain
yield	5.2	%
fracture	> 60	%
fracture	20 to 30	%
Bending modulus	3860	MPa	ASTM D790
bending strength	152	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	69	J/m	ASTM D256
Notched impact strength of cantilever beam	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	162	℃	ASTM D648
Glass transition temperature	150	℃	ASTM D3417
Melting temperature	340	℃	ASTM D3417
Linear coefficient of thermal expansion
MD：-50~50℃	4.3E-5	1/℃	ASTM E831

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.