KetaSpire® KT-820 GF13

About
KetaSpire® KT-820 is a low flow, 13% glass fiber reinforced grade of polyetheretherketone (PEEK). The glass fiber content is optimized to provide a balance of strength and stiffness with toughness-related properties, such as impact resistance and elongation at break. The low fiberglass loading gives the resin improved surface aesthetics and reduced anisotropy over comparable 30% glass reinforced formulations. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in oil and gas recovery, semiconductor fabrication, automotive, aerospace, healthcare, chemical processing, and other industrial uses. This resin is opaque and beige to light brown in color in its natural state. Beige: KT-820 GF13 BG20&&

About

KetaSpire® KT-820 is a low flow, 13% glass fiber reinforced grade of polyetheretherketone (PEEK). The glass fiber content is optimized to provide a balance of strength and stiffness with toughness-related properties, such as impact resistance and elongation at break. The low fiberglass loading gives the resin improved surface aesthetics and reduced anisotropy over comparable 30% glass reinforced formulations. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in oil and gas recovery, semiconductor fabrication, automotive, aerospace, healthcare, chemical processing, and other industrial uses. This resin is opaque and beige to light brown in color in its natural state. Beige: KT-820 GF13 BG20&&

Product Description
Supplier	Solvay
Generic	PEEK
Material Status	Commercial: Active
Features	Good Rigidity,Good Dimensional Stability,Flame Characteristics,High Heat Resistance,Fatigue resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	5900	MPa	ASTM D638
tensile strength	117	MPa	ASTM D638
Tensile strain			ASTM D638
yield	3.9	%	ASTM D638
fracture	6.2	%	ASTM D638
Bending modulus	5600	MPa	ASTM D790
bending strength	203	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	91	J/m	ASTM D256
Notched impact strength of cantilever beam	1000	J/m	ASTM D4218

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	213	℃	ASTM D648

PHYSICAL	Nominal value	Unit	Test method
Density	1.38	g/cm³	ASTM D792
Apparent viscosity of melt
400℃，1000 sec^-1	534000	mPa·s	Internal Method

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	150	°C
Drying time	4.0	hr
Barrel rear temperature	365	°C
Barrel middle temperature	370	°C
Barrel front temperature	375	°C
Nozzle temperature	380	°C
Mold temperature	175 to 205	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.