| About |
|---|
| Ketaspire® MS NT1 AM Filament provides long-term performance up to 240 °C, including exceptional chemical resistance, outstanding wear and abrasion resistance. These properties make it particularly suited for metal replacement in critical applications in severe end-use environments, such as Oil u0026amp; Gas, Aerospace and Automotive. |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PEEK |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good Dimensional Stability,Ductility,Flame Characteristics,High Heat Resistance,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.29 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3120 | MPa | ASTM D638 |
| Tensile strength | |||
| yield | 85.0 | MPa | |
| fracture | 48.0 | MPa | |
| Tensile strain | |||
| yield | 4.8 | % | |
| fracture | 26 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 81 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 343 | ℃ | ASTM D3418 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |