| About |
|---|
| KETJENFLEX® 6 is a toluene sulfonamide based plasticizer used in Plastics, Inks, Adhesives and Coatings. Description and Application KETJENFLEX® 6 is used as a special plasticizer in Plastics, Ink, Adhesive and Coating formulations. KETJENFLEX® 6 effectively plasticizes many resin systems including nitrocellulose, polyamide, PVAC, rosin, epoxy, polyurethane, cellulose acetate and various biopolymers. Another area of use is as starting material in the preparation melamine/urea formaldehyde based laminates as well as reactive plasticizer in epoxy and polyurethane resins. KETJENFLEX® 6 is used up to 5g/l as brightening agent in metal plating processes reducing tensile stress and improving brightness and gloss.&& |
| Product Description | |
|---|---|
| Generic | OTSA增塑剂 |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| bulk density | 730 to 760 | kg/m³ | |
| Additive concentration | > 100 | % | |
| State at Room Temperature | Solid | ||
| chemical properties | Toluene Sulfonamide | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
