Ketron® PEEK LSG

About
KETRON® PEEK LSG natural / black stock shapes are produced from batches of Victrex PEEK. This material exhibits a unique combination of mechanical properties, temperature and chemical resistance. The composition of the resin used for the production of the KETRON® PEEK LSG stock shapes complies with the regulations that apply in the Member States of the European Union (Directive 2002/72/EC, as amended) and in the United States of America (FDA) for plastic materials and articles intended to come into contact with foodstuffs. KETRON PEEK LSG stock shapes have also been successfully type tested for their compliance with both United States Pharmacopeia (USP) and ISO 10993-1 guideline requirements for Biocompatibility Testing of Materials, and they come with full traceability from resin to stock shape. These features, added to an excellent sterilizability by means of steam, dry heat, ethylene oxide, plasma and gamma irradiation, make KETRON PEEK LSG stock shapes very suitable for applications in the medical, pharmaceutical and biotechnology markets. Excellent chemical resistance Very low moisture absorption Inherently good wear and abrasion resistance Unaffected by continuous exposure to hot water or steam&&

About

KETRON® PEEK LSG natural / black stock shapes are produced from batches of Victrex PEEK. This material exhibits a unique combination of mechanical properties, temperature and chemical resistance. The composition of the resin used for the production of the KETRON® PEEK LSG stock shapes complies with the regulations that apply in the Member States of the European Union (Directive 2002/72/EC, as amended) and in the United States of America (FDA) for plastic materials and articles intended to come into contact with foodstuffs. KETRON PEEK LSG stock shapes have also been successfully type tested for their compliance with both United States Pharmacopeia (USP) and ISO 10993-1 guideline requirements for Biocompatibility Testing of Materials, and they come with full traceability from resin to stock shape. These features, added to an excellent sterilizability by means of steam, dry heat, ethylene oxide, plasma and gamma irradiation, make KETRON PEEK LSG stock shapes very suitable for applications in the medical, pharmaceutical and biotechnology markets. Excellent chemical resistance Very low moisture absorption Inherently good wear and abrasion resistance Unaffected by continuous exposure to hot water or steam&&

Product Description
Supplier	Quadrant
Generic	PEEK
Material Status	Commercial: Active
Features	Good disinfection,Steam sterilized,E-beam disinfection,Biocompatible,Food contact compliance,Radiation disinfection,Heat Resistance, Good,Solvent resistance,Ethylene oxide disinfection,V-0
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.31	g/cm³	ISO 1183
Water absorption rate			ISO 62
Saturation, 23 ℃	0.12	%	ISO 62
Equilibrium, 23 ℃, 50% RH	0.050	%	ISO 62

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	160	℃	ISO 75-2/A
Continuous use temperature	250	℃
Melting temperature	340	℃	ISO 11357-3
Linear coefficient of thermal expansion
MD：23~150℃	5.5E-4	1/℃
Thermal conductivity coefficient	0.25	W/m/K

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+13	ohms	IEC 60093
Dielectric strength	24	kV/mm	IEC 60243-1
Dielectric constant
1 MHz	3.20		IEC 60250
Dissipation factor
1 MHz	2.0E-3		IEC 60250

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	105		ISO 2039-2
Tensile modulus	4300	MPa	ISO 527-2
tensile strength
fracture	115	MPa	ISO 527-2
Tensile strain
fracture	17	%	ISO 527-2
bending strength	170	MPa	ISO 178
compressive strength
5% strain	140	MPa	ISO 604

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.