KGF600 - SOLIAO

About

Product Description
Generic	PEEK
Material Status	Commercial: Active

Technical Data
MECHANICAL	Nominal value	Unit	Test method
tensile strength	180	MPa	GB/1040
bending strength	260	MPa	GB/9341
Bending modulus	1200	MPa	GB/9341
Tensile strain	2.5	%	GB/1040
friction coefficient	0.35		GB/T10006
abrasion	1.5	mg/hr	ISO 9352

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	8.2	kJ/m²	ISO179-1
Charpy Unnotch Impact strength	58.0	kJ/m²	ISO179-1

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa	315	℃	GB1634

PHYSICAL	Nominal value	Unit
Shrinkage rate
TD	0.55	%
MD	0.40	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.