| About |
|---|
| KMI PBS KM803 is a Polybutylene Succinate (PBS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of KMI PBS KM803 include business/office goods, consumer goods and kitchenware. Primary characteristic: eco-friendly/green.&& |
| Product Description | |
|---|---|
| Generic | PBS |
| Material Status | Commercial: Active |
| Features | Biodegradable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20-1.28 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| <25 | g/10min | ISO 1133 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 35 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | >300 | % | ISO 527-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | >90 | ℃ | ISO 306/A50 |
| Melting temperature | 110-116 | ℃ | DSC |
| Linear coefficient of thermal expansion |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | >5 | kJ/m² | ISO 179/1eA |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |