KMI PE KM-4112

About
KM-4112 is a Butene Copolymer LLDPE resin used in injection molding. Applications include thin wall lids, caps and closures, and compounding. This grade features excellent processability, cold temperature impact resistance, outstanding flexibility and warpage resistance, good organoleptic properties and high surface gloss. KM-4112 also contains a processing antioxidant.&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,Good surface appearance,High elastic,Inoxidizability,Good sensory characteristics.,Low density,Copolymer,Butylene copolymer,low-temperature impact resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	52	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
F50	10.0	hr	ASTM D1693

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	87.2	℃	ASTM D1525

Supplementary information	Nominal value	Unit	Test method
Snake Flow	356	mm	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	52		ASTM D2240
tensile strength
yield	10.3	MPa	ASTM D638
Tensile strain
fracture	100	%	ASTM D638
Bending modulus	345	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.